This is a reblog on making your own decorative bows from the talented 100layercake.
I can’t wait to make these bows!
~ Sarah xxx
Step 1: Cut the page lengthwise into nine 3/4-inch-thick strips of heights shown: Three at 11 inches, three at 10 inches, two at 9 inches, and one at 3 1/2 inches.
Step 2: Twist each strip to form loops at both ends. Make a circle out of the smallest.
Step 3: Secure the ends with a piece of double-sided tape.
Step 4: Layer and stick, starting with the longest strips. End with the circle in the center.